3D embossed fireproof wood plastic composite WPC wall cladding

Short Description:

Products Ownership:WPC Wall Cladding
Item No:LSC15716
Product Origin:China
Color:Coffee,Chocolate,Wood,Red Wood,Cedar,black,Gray,etc
Shipping Port:Shanghai Port
Lead time:15-25 DAYS

Product Detail

Installation Procedure


Product Tags


3D WPC Wall Cladding














2.2m,2.9m,3.6mor customized


Villa,cottage house

Surface Treatment

3D embossed


Five years

Product Feature

1:New technology 3D embossing WPC outdoor decoration cladding, decorative enhancement. 3D embossing technology is a superficial carving technique. Each cladding is the same as a sculpture, and the artistic atmosphere and visual degree have been greatly improved. Classical 3D embossing is a great improvement in seen wood-plastic cladding, which cannot only be re-engraved with the bands but also support the traces of the start barking.

2:Traditional wpc composite cladding are easy to lose grain on surface,super embossed cladding perform better than any common composite wood,it is more natural and attractive,better fading and scratching resistant.

3:Lihua’s super embossed WPC cladding have all the advantages of traditional composite wall panel ,it is still kept: waterproof, anti-UV, weather resistant, anti-corrosion,insect prevention, low maintenance, long service life etc...And the deep embossed boards look and feel more like the natural wood due to the 3D embossing treatment of the surface.





Data sheet






Falling mass impact resistance EN 15534-1:2014 Section7.1.2.1
EN 15534-5:2014 Section 4.5.1
None of the speciments shall a failure None crack of the test specimens
Flexural properties EN15534-1:2014 AnnexA
EN 15534-5:2014 Section 4.5.2
Deflection under a load of 500N ≤5.0mmBending strengthMaximum load at fracture Front Face:Maximum load: Mean 1906NDeflection at 250N:Mean 0.64mmBack Face:
Maximum load: Mean 1216N
Deflection at 250N:0.76mm
Swelling and water absorption EN 15534-1:2014 Section8.3.1
EN 15534-5:2014 Section 4.5.4
Mean Swelling:≤10% in thickness,≤1.5% in width,≤0.6% in length
Max swelling:≤12% in thickness, ≤2% in width,≤1.2% in length Water absorption:
Mean Swelling:2.25% in thickness,  0.38% in width,0.15% in length
Max Swelling:2.31% in thickness,   0.4% in width,0.22% in length
Water absorption:Mean:5.46%,Max:5.65%
Linear thermal expansion coefficient EN 15534-1:2014 Section9.2
EN 15534-5:2014 Section 4.5.5
≤50×10⁻⁶ K⁻¹ Mean:46.8 x10⁻⁶ K⁻¹
Pull through resistance EN 15534-1:2014 Section7.7
EN 15534-5:2014 Section 4.5.6
Force at failure:479N,Mean value:479N,
Failure mode:479N
There was crack on the test specimen
Heat reversion EN 15534-1:2014 Section9.3
EN 479:1999
EN 15534-5:2014 Section 4.5.6
Test Temperature:100℃Mean: 0.09%

  • Previous:
  • Next:

  • wall cladding installation guide download

    wall cladding installation guide_01

    Q1:Can your WPC products be with customer’s logo ?
    A:Yes,if customer give us their logo,we can put the logo on the packages of the products or print it on the products which are special!

    Q2:How long do you make a new mould for new products?
    A:In general,we need 15-21 days to make a new mould,if there are some difference,5-7 days more need to do minor modifications.

    Q3:Do customer need to pay the fee for new mould?How much is it?Will we return back this fee?How long will?
    A:If customer need to make new mould,yes they need to pay the fee for the mould first,it will be $2300-$2800.And we will return back this fee when the customer place three orders for 20GP container.

    Q4:What is the component of your WPC products?What are they?
    A:Our WPC products component are 30%HDPE+60%Wood Fibers+10%Chemical Additives.

    Q5:How long do you update your products?
    A:We will update our products every month.

    Q6:What is the design principle of your product appearance? What are the advantages?
    A:Our products are design on the practicability of life,like the anti-slip,weather resistant,anti-fading,etc.

    Q7:What are the differences of your products among peers?
    A:Our WPC products are using better and newer material,so the quality is better and the advantage of technology,our price are very good.

    Q8:Who are your R & D personnel? What are the qualifications?
    A:We have a R&D team,all of them have full experience in average,they have worked in this area for more than ten years!

    Q9:What is your product R & D idea?
    A:Our R & D idea is environmental friendly ,low maintenance,long life using and high quality.

    Q10:What are the technical specifications of your products? If so, what are the specific ones?
    A:Our technical specifications are exact size,mechanical property,Anti-slip performance,Waterproof performance,Weather ability,etc.

  • Write your message here and send it to us